1. Cut wire as follows: - 12-inch piece of 22-gauge wire
- Four 3-inch pieces of 24-gauge wire
- Six 12-inch pieces of 28-gauge wire
- Two round loops made from 28-gauge wire
2. Shape the 12-inch wire into an S shape with loops at each end for the main body of the vine. Place it on a sheet of dark paper. Attach the wire to the paper with small pieces of masking tape. Bend the four pieces of 3-inch wire around needle-nose pliers and shape them into loose spirals.
3. Add the two looped 28-gauge wires to the vine and the six pieces of 12-inch 28-gauge wire.
)
