Stamped Iron-On Transfer

Project designed by Ana Araujo.

Materials:

rubber stamps
iron-on transfer sheets for ink-jet printer
black dye-based ink pad
water-based markers
cotton fabric or white T-shirt - cotton or cotton-poly blend
pillow case
iron

Steps:

1. Rubber stamp the image onto transfer sheet using black dye-based ink.
2. Color in stamped image using water-based markers.
3. Cut 1/4" from the edge of the stamped and colored image, leaving a little "tab" near the bottom of the image.
4. Place fabric or T-shirt on a pillow case on a flat surface. Set a dry iron on highest setting. Place the cut-out image on the fabric or T-shirt, image side down. Fold the "tab" back onto the image.
5. Iron over the back of the image, counting slowly to 10. Immediately lift off the image pulling up the "tab."

Tips: For best results stamps, color, cut and iron the image as soon as possible.

Resources
iron-on t-shirt transfer paper - Hewlett-Packard
Hewlett-Packard
Toll Free Phone: 800-752-0900
Website: www.hp.com

rubber stamps
Available at rubber stamp stores nationwide. Contact company for availability of rubber stamps.
Limited Edition Rubber Stamps
We apologize no further information is available.
Guests
Ana Araujo
Creative Arts Designer
Website: www.whencreativityknocks.com
Also in this Episode

Carol Duvall Show : Episode CDS-640
•	Easy Batik Eggs
•	Business Talk
•	Stamped Iron-On Transfer
•	Updated Products