Project designed and demonstrated by Grace Taormina.
Materials:
glass cut to size
Delta glass etching paint kit - #451010056
- PermEnamel surface conditioner
- PermEnamel white frost
Rubber Stampede foam stamps
- fancy fern - #72109
- feaf grass - #72125
- bow - #72117
- pansy - #72080
- anemones - #720133
- rose head - #72029
- ivy - #72011
wedge-shaped applicator sponges
paper plate
paintbrush
masking or painter's tape
assorted stencils
double- sided tape
Steps:
Using stamps
1. Clean the glass with soapy water. Rinse and dry thoroughly.
2. Brush on surface conditioner with a clean, dry brush. Let dry.
3. Use tape to mask off a wide border along the outside edge of the glass (figure A). Using a wedge-shaped applicator sponge, apply white frost onto the stamp. Stamp onto the surface of the glass around the border, reapplying paint after each application (figure B). Let dry overnight.
4. Place masking tape along the outside edges of the already-masked area (figure C) and remove the inner square of masking tape (figure D).
5. Cut out a paper square about an inch smaller than the area on the inside of the tape. Place the paper square in the center of the taped-off area of the glass using double-sided tape (figure E). Use a wedge-shaped sponge to dab white frost paint onto the area between the tape and the paper.
6. Remove the paper square and stamp a pansy in the center of the glass with white frost paint (figure F). Let dry and lift the tape.
Resources foam stamps, applicator sponges
Delta Creative, Inc.
Website:
www.deltacreative.comAir-Dry PermEnamel Glass Etching Paint Kit
Glass Etching Paint Kit Includes: PermEnamel White Frost, PermEnamel Surface Conditioner and smooth textured sponge
Delta Creative
Website:
www.deltacreative.com
Guests Grace Taormina
Vice President of Product and Creative Development, Rubber Stampede
Website:
www.deltacreative.com
Also in this Episode
)
)
)
)
)
)
)
